威尼斯人v23com

NoSpray Fire Safety and Protection Systems
Protection of life at sea. SOLAS Regulation II-2/15.2.11/.12 . DNV certified
x

NoSpray Fire Safety and Fire Protection System from Innovative Manufacturing Europe Rotterdam offers you the simplest and most effective solution for compliance with SOLAS Regulation.

NoSpray Fire Safety & Protection Systems is a DNV certified aluminum/glass cloth jacketing system designed to prevent the spray of flammable oil which can come into contact with hot surfaces in vessel engine rooms thus causing fires and loss of life.









All ships must comply with new SOLAS regulation by July 1, 2003

     
 

SOLAS Regulation II-2/15.2.11/.12 states:

10) All surfaces wih temperatures above 220° which may be impinged as a result of a fuel system failure shall be properly insulated.

11) Fuel oil lines shall be screened or otherwise protected to avoid oil spray or oil leakages onto hot surfaces, into machinery air intakes, or other sources of ignition.

12) Ships constructed before July 1/98 shall comply with the requirements not later than July 1/2003.  

The NoSpray Protection System from Innovative Manufacturing Europe Rotterdam offers you the simplest and most effective solution for compliance with SOLAS Regulation.

Don't risk being caught out by the Class Surveyor at your next survey and order NoSpray today!

 
 

List of Fire Risk Areas to be Protected

  • Maximum Temperature 150°C. & 300 PSI F
  • Fuel oil injection pipes, fuel oil service pipes, fuel oil valve cooling oil pipes attached to diesel engines
  • Lube oil service pipes and hydraulic oil pipes attached to diesel engines
  • Flammable oil pipes
  • Flammable oil pump and strainer
  • Fuel oil heate
  • Lube oil heater and cooler
  • Fuel oil purifier
  • Lube oil purifier
  • Fuel oil burning unit for boiler, thermal oil heater, inert gas generator and incinerator
  • Level gauge, fittings and oil tray of flammable oil tank
  • Sounding pipe head of double bottom fuel oil tank
  • Special pipe joint (threaded pipe joint, compression fitting joint, etc.) and expansion joint in the flammable oil piping

The preceeding areas of fire risk should be protected from the following sources of ignition:

  • exhaust gas pipe
  • steam pipe
  • turbo charger
  • electrical equipment
  • boiler, thermal oil heater, incinerator
  • welding spatter, cigarettes, etc.

 
     
[Dutch version - Nederlands] [German version - Deutsch] [French version - Français] [Spanish version - Español] [Portuguese version - Português] [Italian version - Italioano]